Contents; Section 6: Operation; Adjustment Of Headgear; Performance - ESAB Cigweld ProGuard Operating Manual

5.03 Contents

SECTION 6: Operation

6.01 Adjustment of headgear

ProGuard welding helmets are equipped with a comfortable headgear that can be adjusted in three different ways.

6.02 Performance

To allow the filter to switch both sensors on the front of the filter must not be covered, the filter then switches to the dark state when the
arc strikes and to the clear state when it stops. The filter switches to the light state when the welding arc stops.

6.03 How to Set Shade

On the ProGuard set the shade by turning the knob on the outside of the helmet (pos. 1).
The most suitable setting can be found on the Chart in this brochure or chosen using your experience. This setting can also be made
manually during the welding process.
0-5585
CONTENTS- PROGUARD AUTO-DARKENING WELDING HELMET
Description
ProGuard Auto-Darkening Welding Helmet
Front Cover Lens
Inner Cover Lens
Sweatband
Operating Manual
Table 5-2 Packing List
Push and Move 'Head Height'
Figure 6-1 Headgear Adjustment
Qty
1
2
2
1
1
Longitudinal Adjustment
Rake Adjustment
Push and Turn
'Head Size'
13