Section 5: Specifications; Proguard Auto-Darkening Filter Lens; Range Of Application - ESAB Cigweld ProGuard Operating Manual

SECTION 5: Specifications

5.01 ProGuard Auto-Darkening Filter Lens

Filter Lens
Filter Lens Dimensions
Viewing Area Dimensions
Reaction Time
Sensors
Power Supply
Inactivated Shade Level
Variable Shade Level
Function
Operating Temperature
Storing Temperature
Sensitivity Range (Light to Dark)
Delay (Dark to Light)
On/Off Control
Low Battery Indicator
Helmet Material
Weight
Due to variations that can occur in manufactured products, claimed performance, voltages, ratings, all capacities,
measurements, dimensions and weights quoted are approximate only. Achievable capacities and ratings in use and operation
will depend upon correct installation, use, applications, maintenance and service.

5.02 Range of Application

The ProGuard welding helmets can be used for the following applications:
• Electrode
• MIG
• Mag
• TIG (>=5A)
They are not suitable for use with laser systems and oxy-acetylene (gas welding) applications. The welding filter must not be used for any
other purpose other than welding. They should never be used as sunglasses when driving as this could lead to incorrect identification
of the color of traffic light.
The welding filters operate well under extreme low lighting and very strong sunlight.
12
Description
Table 5-1 Specifications
Auto-Darkening Filter Lens
110mm x 90mm x 7.5mm
100mm x 50mm
0.07ms
1 x CR2450 Lithium Batteries (replaceable) and
Solar Assist
9 - 13
Welding or Grinding
-10° C to +65 °C
-20 °C to +85 °C
Low to High
Infinite stages (0.1s ~ 0.9s)
Automatic
LED Indicator
High Impact Resistant Nylon
NOTE
4
4
500g
0-5585