Operation; Connection And Control Devices - ESAB ESABMig C420 Instruction Manual

GB
6

OPERATION

General safety regulations for the handling of the equipment can be found on
page 4. Read through before you start using the equipment!
WARNING!
Rotating parts can cause injury, take great care.
WARNING – TIPPING RISK!
There is a risk of tipping while transportation and operation, if the welding machine leans
o
more than 10 . In that case appropriate securing has to be provided !
6.1

Connection and control devices

ESABMig C420
1 Mains supply switch
2 Switch, coarse control
3 Switch, precise control
4 Indicating lamp, power supply ON
5 Orange indicating lamp, overheating
6 EURO – connector (for welding gun)
9 Connection for return cable (–), high induc-
tance
C420e1
10 Connection for return cable (–), medium in-
ductance
11 Connection for return cable (–), low induc-
tance
12 Knob for wire speed setting
13 Knob for selecting 2/4–stroke control mode
14 Knob for selecting – creep start – ON/OFF
15 Knob for burn–back time setting
16 Digital instrument – V / A (standard)
– 10 –