Printer Connections - York YK-EP Operation And Maintenance Manual

RS-232 pin assignments (DB9 PC signal set)
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
The connector on the PC has male pins; therefore, the mating cable needs to terminate DB9/F
(female pin) connector.
Brecknell – Brecknell CP130
• Dimensions: 5.25" Long x 3.75" Wide x 2.5" High
• Paper: Thermal 57mm (2.25")
• Type: Dot Matrix
• Purchase: 800-637-0529 (North America) +44 (0) 845-246-6717 (Europe and ME)
• P/N AWT 05-505788 (printer, cable, 1 roll of paper)
• P/N AWT 05-505594 (power supply)
• P/N AWT 05-505671 (case, 20 rolls of paper)

Printer connections

Connect the printer to the Control Center Microboard as follows. Only one printer can be connected
at a time.
Table 208: Brecknell CP130
Microboard
J2-4
J2-2
J2-9
YK-EP Style B Centrifugal Chiller
(Most laptops)
Received line Signal Detector
(Data Carrier Detect)
Recieved Data
Transmit Data
Data Terminal Ready
Signal Ground
Data Set Ready
Request To Send
Clear To Send
Ring Indicator
Modify the cable and connect as shown below
Printer
Pin 3
Pin 5
Pin 6
Function
TX Data to the printer
Busy signal from the printer
Signal Common
225