York YK-EP Operation And Maintenance Manual page 154

Table 148: Programmable
Button Access level
Standard
Week Start/ Operator
Stop Times
Exception
Start/Stop Operator
Times
Schedule
(Enabled/ Operator
Disabled)
Repeat
Sunday Operator
Schedule
Reset All
Exception Operator
Days
Select Operator
Print View
Table 149: Navigation
Button Access level
Home View
Setup View
154
Description
For each day of the week, the user may specify a time for the chiller
to start and a time for the chiller to stop. The times specified in
this entry week will be used as the default for every week of chiller
operation.
For each day of the week, the user may specify a time for the
chiller to start and a time for the chiller to stop. These Start/Stop
combinations may be scheduled up to five (5) weeks in advance
and also for the present week. As each week goes by, the new
schedule will be created for the present week using the Exception
specification in combination with the Standard week definition, as
described above.
Allows the user to enable or disable the monitoring function which
enforces the scheduled starting and stopping of the chiller.
Duplicates the schedule defined for Sunday for the remainder of the
standard weekdays.
Deletes all programming for exception days within the next 6 weeks.
Places a selection box around a start time for a given day. Use ◄ ,
► , ▲ or ▼ cursor arrows to place the box around the desired start
or stop time for a given day.
Generates a Schedule print report.
Description
Returns user to HOME Screen.
Returns user to SETUP Screen.
YK-EP Style B Centrifugal Chiller