Metric Conversion - York YK-EP Operation And Maintenance Manual

Metric conversion

The following factors can be used to convert from English to the most common SI Metric values.
Table 213: SI metric conversion
Measurement
Capacity
Power
Flow rate
Length
Weight
Velocity
Pressure drop
Temperature
To convert degrees Fahrenheit (°F) to degrees Celsius (°C), subtract 32° and multiply by 5/9 or
0.5556.
Example: (45.0°F - 32°) x 0.5556 = 7.22°C
To convert a temperature range (i.e., a range of 10°F) from Fahrenheit to Celsius, multiply by 5/9 or
0.5556.
Example: 10.0°F range x 0.5556 = 5.6 °C range
© 2020 Johnson Controls. 5000 Renaissance Drive, New Freedom, York, PA 17349, USA. Subject to change without notice. All
rights reserved./
Multiply English unit
Tons refrigerant effect (ton)
Horsepower
Gallons / Minute (GPM)
Feet (ft)
Inches (in.)
Pounds (lbs)
Feet / Second (fps)
Feet of Water (ft)
Pounds / Square inch (psi)
By factor To obtain metric unit
3.516
0.7457
0.0631 Liters / Second (l/s)
0.3048
25.4 Millimeters (mm)
0.4536 Kilograms (kg)
0.3048 Meters / Second (m/s)
2.989 Kilopascals (kPa)
6.895 Kilopascals (kPa)
Kilowatts (kW)
Kilowatts (kW)
Meters (m)