Changing The Oil In The Vibrator Housing - Fayat Group BOMAG BVP 10/36 Operating Instructions Manual

Fig. 54
Open the hose clamp (1) (Fig. 54), pull off the
l
hose.
Unscrew fuel screen (2).
l
Clean the fuel screen, check the condition of
l
the screen (holes), replace if necessary.
Check the seal (3) for damage, change if nec-
l
essary.
Turn the fuel screen filter tightly in with the
l
seal.
Reassemble the fuel tank.
l
BVP 10/36, BVP 18/45
*Always follow manufacturer instructions*
BOMAG
*AAA Rent-All 225-291-1356*
Maintenance every year
5.19 Changing the oil in the vi-
brator housing
Tilt the machine slightly towards the side with
l
the oil drain plug and support it safely.
Environment
Environmental hazard!
Catch all old oil, do not let it seep into the
ground but dispose of environmentally.
Fig. 55
Unscrew the drain plug (Fig. 55) and catch the
l
old oil.
Screw the drain plug tightly back in.
l
Stand the machine horizontally.
l
Fig. 56
Unscrew the plug (Fig. 56) and fill with engine
l
oil.
49