Filling in engine oil
Fig. 59
Final work
8.8.2 Changing the oil in the exciter housing
1
Fig. 60
13.
Fill in new engine oil.
14.
After a short test run check the oil level on the dipstick; if nec-
essary, top up to the top dipstick mark.
15.
Check oil filter and drain plug for leaks.
16.
Dispose of oil in an environmentally friendly way.
NOTICE!
Components may get damaged!
–
Use only oil of the permitted specification
Ä Chapter 8.4 „List of fuels and lubri-
cants" on page 65.
Protective equipment:
1.
Park the machine on level ground.
2.
Park the machine safely
in secured condition" on page 51.
3.
Clean the area around the bleeding screw (1) and filling/drain
plug (2).
4.
Tilt the machine slightly towards the oil drain side and secure
it properly.
5.
Unscrew the bleeding screw.
2
6.
Unscrew the filling/drain plug and collect any oil running out.
B-692-0009
BPR 35/60 D
Maintenance – Annually
n
Working clothes
n
Safety shoes
n
Protective gloves
Ä Chapter 6.4 „Parking the machine
73