Fayat Group BOMAG BVP 10/36 Operating Instructions Manual page 10

Technical Data
The following noise and vibration data acc. to
- EC Machine Regulation edition 2006/42/EC
- the noise regulation 2000/14/EG, noise protection guideline 2003/10/EC
- Vibration Protection Regulation 2002/44/EC
were determined during conditions typical for this type of equipment and by application of harmo-
nized standards.
During operation these values may vary because of the existing operating conditions.
Noise value
Sound pressure level on the place of the operator:
BVP 10/36: L = 93 dB(A), determined acc. to ISO 11204 and EN 500
pA
BVP 18/45: L = 95 dB(A), determined acc. to ISO 11204 and EN 500
pA
Guaranteed sound power level:
BVP 10/36: L = 105 dB(A), determined acc. to ISO 3744 and EN 500
WA
BVP 18/45: L = 107 dB(A), determined acc. to ISO 3744 and EN 500
WA
Danger
!
Loss of hearing!
Wear your personal noise protection means (ear defenders) before starting operation.
Vibration value
Hand-arm vibration:
Vector total of the weighted effective acceleration in three orthogonal directions:
Weighted total vibration value
2
BVP 10/36: a = 3.6 m/s
hv
BVP 18/45: a = 7.8m/sec
hv
Caution
!
Observe the daily vibration load (Industrial safety acc. to 2002/44/EEC).
10
*Always follow manufacturer instructions*
on crushed rock determined acc. to ISO 5349 and EN 500
2
on crushed rock determined acc. to ISO 5349 and EN 500
BOMAG
*AAA Rent-All 225-291-1356*
BVP 10/36, BVP 18/45