Fayat Group BOMAG BVP 10/36 Operating Instructions Manual page 27

Fig. 20
Pull the rope by the starter handle quickly and
l
powerful as far out as possible (Fig. 20).
Caution
!
Do not let the starter handle hit back against
the engine.
If the engine does not start during the first at-
l
tempt, repeat the starting process.
Fig. 21
As the engine warms up open the lever (Fig.
l
21) of the choke bit by bit.
BVP 10/36, BVP 18/45
*Always follow manufacturer instructions*
BOMAG
*AAA Rent-All 225-291-1356*
Fig. 22
Move the throttle lever (Fig. 22) back to idle
l
speed position.
Run the engine warm for approx. 1 to 2 min-
l
utes in idle speed.
i
Note
Operation of the vibratory plate can be started as
soon as the engine responds to short throttle com-
mands.
Caution
!
When the engine is running leave the ignition
switch in position "I".
Fig. 23
If the engine stops again after approx. 3 to 5
l
seconds, close the choke again with the lever
(Fig. 23) and repeat the starting process.
Operation
27