Check The Engine Oil Level - Fayat Group BOMAG BT 60/4 Operating Instructions Manual

Vibratory tamper
Table of Contents

Advertisement

Maintenance every day

5.8 Check the engine oil level

Caution
!
Check the engine oil level with highest care, to
avoid over or underfilling of the engine. Under-
filling can damage the engine. Overfilling caus-
es excessive development of smoke and can
also lead to engine damage
i
Note
The engine cannot be started if the engine oil level
is too low.
Stand the tamper on flat and level ground.
G
Shut down the engine.
G
Fig. 32
Pull out the dipstick (Fig. 32) and wipe it clean
G
with a lint-free, clean cloth.
36
Fig. 33
The oil level must reach the bottom edge of the
G
filler bore (Fig. 33), maximum level.
To check the oil level insert the dipstick, but do
G
not screw it in.
If the oil level is too low top up oil immediately.
G
Push the dipstick in again.
G
For quality of oil refer to the table of fuels and
lubricants.
After approx. 1 minute. check the oil level
G
again with the engine shut down.
BOMAG
BT 60/4 BT 65/4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bomag bt 65/4

Table of Contents