Changing The Oil In The Exciter Housing - Fayat Group BOMAG BRP 35/60 D Operating Instruction, Maintenance Instruction

Filling in engine oil
Fig. 66
Final work

8.9.2 Changing the oil in the exciter housing

1
Fig. 67
13. Fill in new engine oil.
14. After a short test run check the oil level on the dipstick; if nec-
essary, top up to the top dipstick mark.
15. Check oil filter and drain plug for leaks.
16. Dispose of oil in an environmentally friendly way.
NOTICE!
Components may get damaged!
– Use only oil of the permitted specification
Ä Chapter 8.4 'List of fuels and lubricants'
on page 69.
Protective equipment:
1. Park the machine on level ground.
2. Park the machine safely
in secured condition' on page 55.
3. Clean the area around the bleeding screw (1) and filling/drain
plug (2).
4. Tilt the machine slightly towards the oil drain side and secure
it properly.
5. Unscrew the bleeding screw.
2
6. Unscrew the filling/drain plug and collect any oil running out.
B-692-0009
BPR 35/60 D
Maintenance – Annually
n Working clothes
n Safety shoes
n Protective gloves
Ä Chapter 6.4 'Parking the machine
79