Table of Contents
Advertisement
Maintenance – Annually / every 250 operating hours
8.9.6 Changing the oil in the exciter housing
1
Fig. 84
Fig. 85
86
NOTICE!
Components may get damaged!
–
–
Protective equipment:
1.
Park the machine on level ground.
2.
Park the machine safely
in secured condition" on page 57.
3.
Clean the area around the bleeding screw (1) and filling/drain
plug (2).
4.
Tilt the machine slightly towards the oil drain side and secure
it properly.
5.
Unscrew the bleeding screw.
6.
Unscrew the filling/drain plug and collect any oil running out.
2
B-692-0196
7.
Tilt the machine to the opposite side and secure it properly.
8.
Fill in new oil.
B-692-0198
DRP70D
Use only oil of the permitted specification
Ä Chapter 8.4 „List of fuels and lubri-
cants" on page 71.
Do not use low-ash engine oils for the exciter
shaft housing.
n
Working clothes
Safety shoes
n
Protective gloves
n
Ä Chapter 6.4 „Parking the machine
Advertisement
Table of Contents
