Advertisement
PD 29160N Mac.book Page 22 Monday, November 13, 2000 1:38 PM
Installation Guide
If you will not install external devices, connect all power cables to
S
7
TEP
the computer and any previously attached external devices, and
plug the cables into an electrical outlet. Turn
devices first; then turn
If you intend to install external devices, see Connecting External
68-pin LVD/SE SCSI Devices (29160 only) below.
If the computer or the devices do not work properly, turn to Trou-
S
8
TEP
bleshooting on page 28.
Connecting External 68-pin LVD/SE SCSI Devices
(29160 only)
Connect external LVD SCSI devices to the 68-pin external
LVD/SE SCSI connector. Each External device will require a 68-
pin external LVD SCSI cable.
N
OTE
devices to the external SCSI connector. If you also attach
older Ultra SCSI devices, the data transfer speed of the LVD
SCSI devices will drop to the speed of the older devices—
including those connected to the internal LVD connector.
(See Achieving Maximum Performance with SpeedFlex on
page 26 for more information on this subject.)
Follow these steps to connect the external devices:
Connect one end of the external LVD SCSI cable to the external
S
1
TEP
LVD/SE connector on the PowerDomain 29160 Card.
68-pin external
LVD/SE SCSI
connector
22
the computer.
ON
We recommend that you connect only LVD SCSI
all external
ON
68-pin external
LVD SCSI cable
Advertisement
