PD 29160N Mac.book Page 17 Monday, November 13, 2000 1:38 PM
Connecting Internal 50-Pin Fast/Ultra-SE SCSI
Devices
Use a 50-pin internal Ultra SCSI cable to connect Fast/Ultra-SE
SCSI devices that have standard 50-pin connectors to the 50-pin
internal Fast/Ultra-SE connector on the Adaptec PowerDomain
29160 or 29160N.
Locate a 50-pin internal Ultra SCSI cable. It should look similar
S
1
TEP
to the cable in the following illustration.
N
OTE
tors are keyed or shaped so
you can attach them only
one way.
To attach a keyed cable con-
nector, align the cable
connector with the notch on
the SCSI PCI card connector
or SCSI device connector,
and press the cable connec-
tor firmly into the SCSI PCI
card or SCSI device
connector.
Adaptec PowerDomain 29160/29160N
Nonterminated connectors for Ultra/Fast devices
Internal cable connec-
Keyed cable connector
1. Align the cable connector tab
with the device connector notch.
2. Press the cable connector firmly
into the device connector.
17