PD 29160N Mac.book Page 23 Monday, November 13, 2000 1:38 PM
Connect the other end of the external SCSI cable to a SCSI con-
S
2
TEP
nector on the back of an external SCSI device. If you are
installing only one external device, terminate the device and skip
to Step 4.
N
OTE
to ensure optimum performance. See Terminating the SCSI
Bus on page 11 for more information.
Connect other external devices by cabling each device to the pre-
S
3
TEP
vious one, as shown below. Terminate only the device at the end
of the chain.
Adaptec PowerDomain 29160/29160N
An LVD terminator must be used for LVD SCSI devices
Unterminated
Terminated
SCSI terminator
23