Advertisement
PD 29160N Mac.book Page 13 Monday, November 13, 2000 1:38 PM
Locate the 68-pin internal LVD SCSI cable, which should look
S
1
TEP
similar to one of the cables shown below. Cables can have twisted
wires (first example) or flat, laminated wires (second example).
Built-in terminator
Built-in terminator
N
OTE
tors are keyed or shaped so
you can attach them only
one way.
To attach a trapezoidal-
shaped cable connector such
as the 68-pin connector,
align the cable connector
with the SCSI card connec-
tor or SCSI device
connector, and press the
cable connector firmly into
the SCSI card or SCSI device
connector.
Adaptec PowerDomain 29160/29160N
Connectors for the LVD SCSI devices
Connectors for the SE SCSI devices
Connector for PowerDomain card
Internal cable connec-
Connector for
PowerDomain card
Shaped cable connector
1. Align the shaped cable connec-
tor with the device connector.
(68-pin connector)
2. Press the cable connector firmly
into the device connector.
13
Advertisement
