Advertisement
PD 29160N Mac.book Page 20 Monday, November 13, 2000 1:38 PM
Installation Guide
If you want to install external devices, go to the section Connect-
ing External 50-pin Fast/Ultra-SE SCSI Devices (29160N only) on
page 25 or Connecting External 68-pin LVD/SE SCSI Devices
(29160 only) on page 22.
If the computer or the devices do not work properly, turn to Trou-
S
9
TEP
bleshooting on page 28.
Connecting Internal 68-Pin SE SCSI Devices
(29160 only)
Internal Ultra/Wide SCSI devices are connected to the 68-pin
internal SE Wide SCSI connector. To do this use a 68-pin Wide
SCSI cable like the one shown in Step 1 below. Continue follow-
ing the steps to connect any SE devices.
Locate a 68-pin internal Wide SCSI cable.
S
1
TEP
Plug one end of the cable to the Wide SCSI connector on the
S
2
TEP
Adaptec PowerDomain 29160.
68-pin internal Wide SCSI
cable
68-pin Wide SE SCSI connector
20
Nonterminated connectors for
Ultra/Wide devices
Advertisement
