PD 29160N Mac.book Page 21 Monday, November 13, 2000 1:38 PM
Plug the other end of the cable to a terminated Ultra/Fast Wide
S
3
TEP
SCSI device.
Terminated SCSI device
If you have other Ultra/Fast Wide SCSI devices, attach them to
S
4
TEP
the connectors between the two ends of the cable. Be sure these
other devices are unterminated.
After you have connected all your inter-
S
5
TEP
nal SE SCSI devices to the Adaptec
PowerDomain 29160, plug a power cord
bundle from the computer into each
device.
When you have installed all your internal devices, close the cover
S
6
TEP
or replace the cover on the computer case. (Refer to the instruc-
tions in the Setting Up Your Power Macintosh that came with your
computer.)
Adaptec PowerDomain 29160/29160N
Unterminated SCSI device
Terminated SCSI device
Power cord bundle
from the computer
21