Advertisement
PD 29160N Mac.book Page 16 Monday, November 13, 2000 1:38 PM
Installation Guide
When you have installed all your internal devices, close the cover
S
6
TEP
or replace the cover on the computer case. (Refer to the instruc-
tions in Setting Up Your Power Macintosh.)
If you will not be installing external devices, connect all power
S
7
TEP
cables to the computer and any previously attached external
devices, and plug the cables into an electrical outlet. Turn
external devices first—before you turn
If you intend to install external devices, go to the section titled
Connecting External 68-pin LVD/SE SCSI Devices (29160 only) on
page 22 or the section titled Connecting External 50-pin
Fast/Ultra-SE SCSI Devices (29160N only) on page 25.
If the computer or the devices do not work properly, turn to Trou-
S
8
TEP
bleshooting on page 28.
16
all
ON
the computer.
ON
Advertisement
