Mitel MX-ONE Installation Instruction page 19

I B
NSTALLING OARDS AND
3.3.2
19
C
ABLING
Figure 12: Connecting the Batteries
General battery connection:
1. Connect the cable lug (L) of the grey cable to the red plus pole (D) of the right-
most battery block, see Figure 12: Connecting the Batteries on page 19.
2. Fasten the screw (B) to secure the cable lug and press down the cover (I) on the
red plus pole (D).
3. Connect the cable lug (M) of the black cable to the minus pole (D) of the leftmost
battery block, see Figure 12: Connecting the Batteries on page 19.
4. Fasten the screw (B) to secure the cable lug and press down the cover (I) on the
black minus pole (D).
5. Connect the other end of the cable (blue connector) to the Power Unit. It is posi-
tioned at the rear side of the unit.
CONNECTING THE AC/DC UNIT TO THE MIVOICE MX-ONE
See suppliers documentation for correct connection to the AC/DC.
When connecting cables in the AC/DC unit, always fasten nearby cables to each others
and to any cable cloth or frame using fastener straps included in the 25/BYB 501/1.
This to relieve the force on the connections.
Table 5 Set of Cable holders (Cable tie)
25/BYB 501/1 Set for cables
Title/Function
HOLDER FOR STRAP
CABLE CLAMP (STRAP)
Product Number
SXA 123 0411/2
SET 103 02
21/1531-ASP11301 Uen C 2017-03-28
Quantity
40
40