Connector Positions - Mitel MX-ONE Installation Instruction

Unit
MX-ONE 1U
chassis,
87L00032BAA-A
Network
Power to Fan *) and
to 7U chassis
Fan *) to alarm
Splitter cable for 1U
and 3U chassis
3.1
3.1.1
21/1531-ASP11301 Uen C 2017-03-28
Cable Product Number
51305285
TSR 482 0211/20M
61L00002BAA-A
51305286
51305287
50006938
50006937
TSR 902 0274/2200
TSR 902 0277/2000
SXK 106 2097/1
50006936
*) Fan BFD50908/4
Note: Consider the needed cabling for network or server redundancy. For more infor-
mation, see the description for MIVOICE MX-ONE, chapter REDUNDANCY.

CONNECTOR POSITIONS

Only boards with EMC shielded fronts are used in the MX-ONE subracks.
CONNECTOR NUMBERING
The connector positions are marked in numerical order starting from 1 for the lowest
connector position, 2 for the position above it and so on, see Figure 8: Connectors
positioning on page 15.
Remarks
2 meters to AC/DC, 48V
LAN, 100KBit. RJ45 - RJ45, straight. L=20
meters
LAN, 1GBit, RJ45 - RJ45, straight.
L= 20 meters
5 meters long, -48V
12 meters long, -48V
5 meter splitter cable to both 7U AND Fan, -48V
12 meter splitter cable to 7U AND Fan, -48V
Alarm cables and plug
Splitter 1 to 2. Used when 5 to 8 pcs of 1U/3U
chassis are fed from the same power Unit.
C
ABLING
14