Table of Contents
Advertisement
Reference Manual
00809-0100-4244
8. Where more options are available than can be displayed on the screen use the
9. Pressing the Forward key
10. Pressing the Back key
11. Pressing the Home key
12. Press
Reference Manual
This gives the operator access to the Shutdown option for the analyzer which will
close the software. The other options are factory menus that the operator WILL NOT
need to access but are available for a Rosemount service technician during any
planned future maintenance.
or
keys to scroll up or down onto the next page. The screen will continually wrap
around until the option required is highlighted.
in the Data Service/Shutdown example below. Pressing the screen Refresh key
any time will refresh the current display screen if required by the operator.
SAVE CONFIG
NOT AN OPERATOR OPTION - saves the current
configuration to the SD card.
SHUTDOWN
allows the OPERATOR to shutdown the software in a
controlled manner.
SHOW VERSIONS
displays the software version installed on the analyzer.
NETWORK INFO
NOT AN OPERATOR OPTION – displays the network
information.
CHANGE IP ADDRESS NOT AN OPERATOR OPTION – displays one of the IP
address.
or
and select SYSTEM. Press
Figure 8-1: Main Menu
will move to the next screen where available as shown
will return to the previous screen.
at any time will return to the Main Menu screen.
.
Shutdown procedure
January 2020
at
93
Advertisement
Table of Contents
