Emerson Rosemount CT4400 Reference Manual page 2

Preface
Published by Emerson.
All possible care has been taken in the preparation of this publication, but Emerson and its agents and distributors accept no
liability for any inaccuracies that may be found. This manual reflects the state of the product at the issue date below, but further
enhancements while in service may mean that the manual does not reflect your particular system.
Emerson reserves the right to make changes without notice both to this publication and the products which it describes.
Document number 00809-0100-4244 Rev AA, January 2020.
©
Emerson 2020. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means electronic,
mechanical, photocopying, recording, or otherwise without the express prior written permission of the copyright holder.
If you require additional technical assistance, request help from
Send general inquiries to cascade.support@emerson.com.
All trademarks used within this document are the property of their respective owners.
Important instructions
Important
Users must read, understand and comply with the following information before proceeding.
All users, installers, operators, and maintainers must be familiar with operating the analyzer. To install, start up, operate, maintain
and service the analyzer in a safe manner, it is MANDATORY to read all additional instruction manuals shipped with the analyzer.
The following instruction manual(s) are available and/or referenced within this manual:
• Rosemount CT4400 Quick Start Guide
All instructions must be saved for future use. Contact your local service center or sales office if you are missing documents.
User information
Important
All users must read this page before proceeding!
Rosemount designs, manufactures, and tests its products to meet many national and international standards. The Rosemount
CT4400 is a sophisticated technical product, and to ensure it continues to operate as designed and within normal specifications, it
MUST be installed, used, and maintained correctly. The following instructions MUST be adhered to and integrated into your safety
program when installing, using, and maintaining Rosemount products.
• Failure to follow the proper instructions may cause:
— Loss of life.
— Personal injury
— Damage to property
— Damage to the analyzer
— Warranty invalidation
• Read all instructions prior to installing, operating, and servicing the analyzer.
• If you do not understand any of the instructions, contact your Rosemount Customer Care Representative for clarification.
• Follow all warnings, cautions, and instructions marked on and supplied with the analyzer.
• Inform and educate your personnel in the proper installation, operation, and maintenance of the analyzer.
• Install the analyzer as specified in the Installation Instructions of the manual and in accordance with all applicable local and
national codes.
• Connect the analyzer to the proper electrical and pressure sources.
• To ensure proper performance, use qualified personnel to install, operate, update, program, and maintain the analyzer.
• When replacement parts are required, ensure that only qualified people install replacement parts specified by Rosemount.
• Unauthorized parts and procedures can affect the analyzer's performance, placing the safe operation of your process at risk,
and VOID YOUR WARRANTY. Look-alike substitutions may result in fire, electrical hazards, or improper operation.
2
cascade.support@emerson.com or Emerson distribution partners.