Emerson Rosemount CT4400 Reference Manual page 4

Associated publications
Quick Start Guide
Compliance approvals
Waste disposal
Safety and information notices
DANGER
WILL CAUSE DEATH
Failure to follow this warning will result in death or serious injury to personnel.
WARNING
DANGER TO PERSONNEL
Failure to follow this warning may result in serious injury to personnel.
WARNING
SAFETY COMPLIANCE
Repairs or alterations are not permitted on any flame-proof paths, features, or joints.
Failure to follow this warning may compromise the product's safety protection method and void the product certification.
NOTICE
Important messages will appear in this format.
Safety information
All authorized users, including installation, operation, and maintenance personnel, MUST observe the following safety
precautions and warnings.
DANGER
ELECTRIC SHOCK
The analyzer operates using mains voltage that is dangerous to life. Make sure that the power ON/OFF switch at the rear of the
panel is set to OFF and the power cable plug is removed BEFORE removing the top cover.
THE ANALYZER MUST BE EARTHED USING A GROUNDED THREE CORE CABLE suitable for the rating defined in the General
Characteristics (Table 1-3).
Failure to observe this precaution will cause death, personal injury, and/or damage to persons and/or property.
4
This product complies with USA 21 CFR 1040.10. It is also designed and manufactured
under an approved quality management system to ISO 9001:2015.
Emerson and the Rosemount CT4400 Gas Analyzer have satisfied the requirements
for applying the CE marking to the Rosemount CT4400 Gas Analyzer.
This equipment meets all requirements of the EMC and Low Voltage directives.
Do not dispose of measuring tools into household waste.
Only for EC countries:
In accordance with European Directive 2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national right, measuring tools that are no
longer usable must be collected separately and disposed of in an environmentally
correct manner.