5 Low-profile computers only– To install the AUA-3100LP adapter
in a low-profile computer, replace the existing full-height
bracket with the low-profile bracket included in your kit.
Remove and replace the bracket attachment screws on the
adapter as shown below.
6 Insert the USB2connect adapter into the PCI expansion slot.
Press down firmly until the card clicks into place.
7 Replace the slot cover screw. When installed properly, the card
should be level with the expansion slot, as shown below.
8 Close the computer cabinet and reattach the power cord.
Installing the USB2Connect Adapter
Slot cover screw
USB2connect card
5