The AUA-4000A and AUA-5100 adapters are shown below.
System Requirements
In order to use the USB2connect adapter, you need
One of the following types of computers:
I
Windows 2000, Windows Me, or Windows 98 SE computer
I
with a 200-MHz (or faster) processor
Power Macintosh Beige G3, Rev. B or newer, with Macintosh
I
OS 9.0.4 and later
Note: For the latest information on operating system support,
see the
Readme
at
www.adaptec.com
An available PCI slot (32-bit or 64-bit, 3.3-volt or 5-volt, 33-MHz
I
and 66-MHz)
Note: If you are installing the adapter in a low-profile computer,
you need a low-profile bracket. See
on page iii
A CD-ROM drive
I
External
connectors
AUA-4000A
file on the CD or check the Adaptec Web site
.
for information on ordering parts.
Jumper connector
AUA-5100
Adaptec Technical Support
Overview
Internal
connector
2