This Guide describes how to install the Adaptec DuoConnect AUA-3121 adapter in a Windows computer. Kit Contents DuoConnect adapter FireWire cable (6-foot/1.8 meter, 6-to-4-pin FireWire cable used to connect digital video cameras) Printed Adaptec DuoConnect Installation Guide DuoConnect CD containing: This User’s Guide...
The DuoConnect adapter is not compatible with blue and white G3s. For the latest information on operating system support, see the Readme file on the CD or check the Adaptec Web site at http://www.adaptec.com. An available PCI slot (32-bit or 64-bit, 3.3-volt or 5-volt, 33-MHz and...
Page 4
Installing the DuoConnect Adapter To install the DuoConnect adapter in a computer, follow these instructions: Discharge any static electricity from your body by touching a grounded metal object (such as the exposed metal parts on the back of your computer) before handling the DuoConnect adapter. Turn off power to the computer and disconnect the power cord.
Page 5
Insert the DuoConnect adapter in the PCI expansion slot. Press the adapter firmly into the slot until it clicks into place. Replace the slot cover screw. When installed properly, the adapter should be level with the expansion slot, as shown below.
Page 6
1394 ports. If your system does not have a spare power connector, you can buy one at most computer and electronics stores. Check www.adaptec.com for more information. Close the computer cabinet and reattach the power cord. Adapter power connector...
Need help?
Do you have a question about the DuoConnect AUA-3121 and is the answer not in the manual?
Questions and answers