Advertisement
Table of Contents
This Guide describes how to install the Adaptec DuoConnect AUA-3020
adapter in a Windows computer.
Kit Contents
DuoConnect adapter
FireWire cable (6-foot/1.8 meter, 6-to-4-pin FireWire cable used to
connect digital video cameras)
DuoConnect CD containing device drivers, software, the AUA-3020
DuoConnect Adapter User's Guide, and other documentation
Adaptec DuoConnect Installation Guide
The User's Guide on the CD provides more detailed instructions on
installing the adapter, including driver installation instructions and
troubleshooting tips. In addition, the User's Guide provides Technical
Support and Warranty information for your adapter.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Adaptec DuoConnect AUA-3020
Summary of Contents for Adaptec DuoConnect AUA-3020
-
Page 1: Kit Contents
This Guide describes how to install the Adaptec DuoConnect AUA-3020 adapter in a Windows computer. Kit Contents DuoConnect adapter FireWire cable (6-foot/1.8 meter, 6-to-4-pin FireWire cable used to connect digital video cameras) DuoConnect CD containing device drivers, software, the AUA-3020 DuoConnect Adapter User’s Guide, and other documentation... -
Page 2: System Requirements
System Requirements In order to use the DuoConnect adapter, you need One of the following types of computers: Windows XP, Windows 2000, Windows Me, or Windows 98SE computer with a 200-MHz (or faster) processor Power Macintosh Beige G3, Rev. B or newer, with Macintosh OS 9.0.4 and later An available PCI slot (32-bit or 64-bit, 3.3-volt or 5-volt, 33-MHz and 66-MHz) - Page 3 Installing the DuoConnect Adapter To install the DuoConnect adapter in a computer, follow these instructions: Discharge any static electricity from your body by touching a grounded metal object (such as the exposed metal parts on the back of your computer) before handling the DuoConnect adapter. Turn off power to the computer and disconnect the power cord.
- Page 4 Insert the DuoConnect adapter in the PCI expansion slot. Press the adapter firmly into the slot until it clicks into place. Replace the slot cover screw. When installed properly, the adapter should be level with the expansion slot, as shown below. Close the computer cabinet and reattach the power cord.
- Page 5 691 South Milpitas Boulevard Milpitas, CA 95035 USA © 2001– 2002 Adaptec, Inc. All rights reserved. Adaptec and the Adaptec logo are trademarks of Adaptec, Inc. which may be registered in some jurisdictions. Part Number: 512924-06, Ver. AD LB 10/02...
- Page 6 Adaptec AUA-3020 DuoConnect Adapter Installation Guide...
Need help?
Do you have a question about the DuoConnect AUA-3020 and is the answer not in the manual?
Questions and answers