Table of Contents
Advertisement
Troubleshooting
If you encounter difficulties installing or using your USB2connect
for Notebooks adapter, check the following:
Is the adapter inserted completely in the CardBus slot?
I
Is the cable properly connected to the USB2connect for Notebooks
I
adapter and the device?
Is your device powered on?
I
Does the device require an external power source? See
I
Power Source on page 21
Are you encountering problems hotplugging the USB2connect
I
adapter? If so, an external power source may be required to run
your USB devices. See
file on the USB2connect for Notebooks CD.
Readme
Did you encounter problems with a USB device when it is
I
connected to a hub? If so, connect the affected device directly to
the USB2connect for Notebooks adapter.
Did you encounter problems loading the drivers on your
I
Windows 2000 operating system? If so, refer to the
on the USB2connect for Notebooks CD. Also, check the
Windows 2000 event log and the troubleshooting section of
your operating system user's guide.
Are you having problems using your notebook computer after
I
you disconnect a device? If so, restart the computer, and see if
the problem recurs.
Macintosh only – Do you see either of the USB2connect
I
for Notebooks adapter icons shown at right on your
desktop? If not, this means the driver is disabled or not
installed. See
If you have further difficulties, check the
on the USB2connect for Notebooks CD and
www.adaptec.com
For more troubleshooting information, visit
and
http://ask.adaptec.com
for details.
External Power Source on page 21
Installing the Macintosh Driver on page
.
.
Troubleshooting
External
and the
Readme
20.
file
Readme
http://
http://www.adaptec.com
file
23
Advertisement
Table of Contents
