Table of Contents
Advertisement
Installing the Macintosh
Driver
1 Turn on the computer and insert the USB2connect for
Notebooks CD.
2 Double-click the Start Installation Here installer file on the CD.
3 Read the directions carefully and follow all installation
instructions.
4 After the installation is complete, restart the PowerBook.
5 Once the system has restarted, insert the USB2connect for
Notebooks adapter in the CardBus slot of your PowerBook.
CardBus slot
USB2connect for
Notebooks adapter
6 If the driver installation was successful and the
USB2connect for Notebooks is fully inserted, you will
see one of the USB2connect for Notebooks adapter icons
shown at right on your desktop. If not, see
on page
23.
Installing the Macintosh Driver
Troubleshooting
20
Advertisement
Table of Contents
