Hotplugging USB Devices
The USB2connect for Notebooks adapter supports hotplugging,
allowing USB devices to be attached and recognized while the
computer is on. Device manufacturers support hotplugging in
different ways. Refer to the instructions for each device for
attaching and mounting recommendations.
Note: Moving a device from one adapter connector to another
can cause the operating system to initiate a new hardware
installation process. Refer to the
Hubs
The following figure shows the recommended configuration for
connecting USB 1.1 and USB 2.0 devices. Note that you could
connect USB 2.0 devices to a USB 1.1 hub, but the USB 2.0 devices
would run at USB 1.1 speeds.
Connecting USB Devices
file for details.
Readme
22