About Modules Applicable To The Emc Directive - Mitsubishi 900 Series User Manual

8.2.2

About modules applicable to the EMC directive

The following table lists the modules compliant with the EMC directive.
A950GOT
(Built-in RS-422 communication interface)
A951GOT-Q
(Built-in bus communication interface for Q CPU (Q mode))
A951GOT
(Built-in bus communication interface for A/QnA/Motion controller CPU)
A953GOT
(Built-in RS-232C communication Interface)
A956GOT
(Built-in communication module Interface)
A956WGOT
(Built-in communication module Interface)
1 Be aware that if using A950GOT after removing the control panel as described in item 6.1.4, it is not
*
applicable to the EMC directive.
If connecting to a PLC not from this company (MELSEC-Q series, MELSEC-QnA
series, MELSEC-A series), refer to the manual of the connected device (PLC,
microcomputer) for information about the applicability of the EMC directive
Item
8.2 System Configuration when EMC Directive is Applicable
8.2.2 About modules applicable to the EMC directive
: Compliant with EMC directive
Type
A950GOT-TBD(-M3)
A950GOT-SBD(-M3)
A950GOT-SBD(-M3)-B
A950GOT-LBD(-M3)
A951GOT-QTBD(-M3)
A951GOT-QSBD(-M3)
A951GOT-QSBD(-M3)-B
A951GOT-QLBD(-M3)
A951GOT-TBD(-M3)
A951GOT-SBD(-M3)
A951GOT-SBD(-M3)-B
A951GOT-LBD(-M3)
A953GOT-TBD(-M3)
A953GOT-SBD(-M3)
A953GOT-SBD(-M3)-B
A953GOT-LBD(-M3)
A956GOT-TBD(-M3)
A956GOT-SBD(-M3)
A956GOT-SBD(-M3)-B
A956GOT-LBD(-M3)
A956WGOT-TBD
: Not compliant with EMC directive
EMC Directive
8 - 6
1
2
3
4
5
6
7
8