Loading And Unloading Procedures - Mitsubishi 900 Series User Manual

6.4.5

Loading and unloading procedures

The PC card can be loaded/unloaded while power is on. Note that the PC card should be loaded/unloaded
after it has been made ready to be loaded/unloaded in the following procedures.
(1) Mounting
Memory card
LED
MEMORY
BUSY
CARD READ WRITE
CARD
EJECT
PC card
(2) Dismounting
Memory card
LED
MEMORY
BUSY
CARD READ WRITE
CARD
EJECT
Memory card eject button
1) Set the memory card access switch of the A1SD59J-MIF to
"OFF" and make sure that the memory card LED goes off.
Memory card
When the memory card LED goes off, the PC card can be
access switch
loaded/unloaded while power is on.
2) When loading the PC card into the A1SD59J-MIF, insert and
load it into the PC card interface with its top face up.
A1SD59J-MIF
1) Set the memory card access switch of the A1SD59J-MIF to
"OFF" and make sure that the memory card LED goes off.
Memory card
access switch
When the PC card LED goes off, the memory card can be
loaded/unloaded while power is on.
2) Remove the PC card after fully pushing the memory card eject
button of the A1SD59J-MIF to eject the PC card.
A1SD59J-MIF
6.4 Memory Card Interface Module
6.4.5 Loading and unloading procedures
1
2
3
4
5
6
7
8
6 - 17