Rdm Functions - ProLights EclDisplay UN User Manual

10 - RDM FUNCTIONS

The product can communicate using RDM (Remote Device Management) protocol over a DMX512
Networks.
RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open
standard for DMX512 device configuration and status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting
existing non-RDM equipment. It allows a console or dedicated RDM controller to send commands to
and receive messages from specific fixtures.
Product
ECLDISPLAYUN
ECLDISPLAYDAT
The PIDs in the following tables are supported in the product.
Category
Product
DEVICE_INFO
Information
PRODUCT_DETAIL_ID_LIST
DEVICE_MODEL_DESCRIPTION
MANUFACTURER_LABEL
DEVICE_LABEL
FACTORY_DEFAULTS
SOFTWARE_VERSION_LABEL
DMX512
DMX_PERSONALITY*
Setup
DMX_PERSONALITY_DESCRIPTION
DMX_START_ADDRESS*
Dimmer
DIMMER_INFO
Settings
CURVE*
CURVE_DESCRIPTION
OUTPUT_RESPONSE_TIME*
OUTPUT_RESPONSE_TIME_ DESCRIPTION
MODULATION_FREQUENCY*
MODULATION_FREQUENCY_ DESCRIPTION
Model ID
D057
D058
Parameter
PROLIGHTS - EclDisplay UN - EclDisplay DAT
Mode IDs
UNO: 1
BASIC: 2
STANDARD: 3
EXTENDED: 4
UNO: 1
BASIC: 2
STANDARD: 3
EXTENDED: 4
PID GET
0x0060 x
0x0070 x
0x0080 x
0x0081 x
0x0082 x
0x0090 x
0x00C0 x
0x00E0 x
0x00E1 x
0x00F0 x
0x0340 x
0x0343 x
0x0344 x
0x0345 x
0x0346 x
0x0347 x
0x0348 x
SET
x
x
x
x
x
x
x
x
15