ProLights EclDisplay UN User Manual page 19

NOTE: the terms shown in BOLD indicates the default settings.
MENU*
1 DMX_START_ADDRESS
2 DMX_PERSONALITY
3 CURVE
4 OUTPUT_RESPONSE_TIME
5 MODULATION_FREQUENCY
SPECIAL PIDs**
1 DMX FAULT
2 MASTER/SLAVE
3 STATIC DIMMER
4 STATIC STROBE
5 WHITE CALIBRATION
6 CURRENT HOURS
7 POWER CONSUMPTION(AC 220V)
8 MAINTENANCE TIME
9 MAINTENANCE TIME
10 CLEAN ALL DATA
001 - 512
0:UNO
1:BASIC
2:STANDARD
3:EXTENDED
0:LINEAR
1:S-CURVE
2:SQUARE LAW
3:INVERSE SQUARE LAW
0:AUTO
1:FAST
2:MEDUIM
3:SLOW
0:600Hz
1:1200Hz
2:2000Hz
3:4000Hz
4:6000Hz
5:25kHz
0:BLACKOUT
1:HOLD
2:STAND ALONE
0:MST DMX
1:MST NO DMX
2:SLAVE
(000 ÷ 255)
(000 ÷ 020)
(125 ÷ 255)
(00000-65535)
(ALERT PERIOD:10 ÷ 300)
(ELAPSED TIME:00-ALERT PERIOD)
0:NO
1:YES
PROLIGHTS - EclDisplay UN - EclDisplay DAT
To choose the DMX mode.
To choose the dimmer curve.
To choose the dimmer speed.
Select PWM frequency.
To choose the behaviour of fixture in case of
dmx signal lost.
Outputs dmx signal.
Doesn't output dmx signal.
Receive dmx signal.
To choose the dimmer channel value for
Stand Alone mode.
To choose the strobe channel value for Stand
Alone mode.
Max value of white color intensity.
Shows fixture hours.
Shows fixture's power consumption.
To set maintenance time alert period
Shows elapsed tiime to alert period.
Complete reset of the fixture.
17