Connection To The Mains Supply - ProLights EclDisplay UN User Manual

6 - CONNECTION TO THE MAINS SUPPLY

WARNING: For protection from electric shock, the fixture must be earthed!
The product is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz
AC power source from 100-240 Volts.
If you need to install a power plug on the power cable to allow connection to power outlets, install a
grounding-type (earthed) plug, following the plug manufacturer's instructions. If you have any doubts
about proper installation, consult a qualified electrician.
The max power consumption is 33W.
ECLDISPLAYUN
Press the top and bottom sides of the cage at the indicated point (1). Then remove it (2).
10
PROLIGHTS - EclDisplay UN - EclDisplay DAT
1
1
L
N
GND
DMX- / DALI2
DMX+ / DALI1
SWITCH DALI
DMX
DIMMER
POWER / SIGNAL
2
2
Fig. 05