Creating an Array With the
ARRAYCONFIG UDMA
Utility
In this Chapter
Creating an Array
Making the Array Bootable
This chapter explains how to use the ARRAYCONFIG UDMA Util-
ity to create a bootable or non-bootable array on your system. If you
want a bootable array on your system, you must use the
ARRAYCONFIG UDMA utility to create the bootable array.
Note:
ARRAYCONFIG UDMA runs from a self-booting dis-
kette. If you are changing the configuration of a system that
is already in use on a network, log all users off the system
and shut it down in an orderly manner before you start
ARRAYCONFIG UDMA.
3
3-2
3-8
3-1