Table of Contents
Advertisement
ASA-7211C/F Installation Guide
Installing the Driver in Windows 2000
To install the driver:
1
Install the Adaptec iSCSI adapter according to the instructions
in
Chapter
2.
2
Start Windows and log in with administrative privileges.
The Windows Found New Hardware Wizard automatically
detects the new hardware.
The adapter is identified as a
will be listed under the
in the Device Manager.
3
Click Next.
Select Search for a suitable driver for my device (recommended)
4
and then click Next.
In the Locate Driver Files window, select Specify a location.
5
6
Insert the Adaptec installation CD and then click Next.
Click Browse and locate the
7
Click Open and then click OK.
8
9
In the Driver Files Search Results window, select Next and
follow the on-screen instructions to install the driver.
10 If the Digital Signature Not Found window is displayed, click
Yes to continue.
11 In the Completing the Found New Hardware Wizard window,
click Finish.
12 After the driver installation is finished, the Found New
Hardware Wizard window displays a second time, requesting
that you install the Adaptec ASAMGMT Processor Device.
Click Yes.
3-4
Mass Storage Controller
SCSI and RAID Controllers
driver folder on the CD.
Win2000
. Later, it
device group
Advertisement
Table of Contents
