Installing The Software Driver For Novell Netware - Adaptec AAA-UDMA Install Manual

Adaptec aaa-udma raid controllers: install guide

Hide thumbs Also See for AAA-UDMA:

Table of Contents

Installing the Software

Driver for Novell NetWare

In this Chapter

Installing the Array1000UDMA Driver for Novell NetWare 6-2

Netware Installation and Configuration Notes

This chapter explains how to install the Array1000UDMA software

driver (cdaudmah.ham) for Novell NetWare (NetWare 4.11, 4.2, and

5.0). Before installing the driver, make sure you have completed the

following:

Installed the AAA-UDMA RAID card in your system.

(See Chapter 2)

Created the first array using the ARRAYCONFIG UDMA

utility, if you plan to boot from an array. (See Chapter 3)

Once NetWare and the driver are installed, install Adaptec CI/O

Management Software from the server console (CI/O is required for

array management in order to provide the proper level of fault

tolerance and event notification). Refer to the Adaptec CI/O Manage-

ment Software User's Guide for instructions on installing and using the

software.

6-7

6-1

Table of Contents