Calibration Tab - Ametek Dycor CG1100 Series User Manual

Calibration Tab

Defines type of calibration.
Figure 4-7. Calibration tab.
Span & zero
Span only
Zero only
Calibrate span
Calibrate zero
Cancel/abort
Last calibration
Dual gas calibration.
click to calibrate on both span and zero gas.
single gas calibration. click to calibrate span gas only.
single gas calibration. click to calibrate zero gas only.
Begins calibration for span gas. Button grays out when
clicked and calibration is in process.
Begins calibration for zero gas. Button grays out when
clicked and calibration is in process.
click on the Span & Zero in a dual calibration.
click on the Span Only or Zero Only on a single cali-
bration.
The calibration will abort and the Calibrate button will
no longer be grayed out. Also, you can click Cancel at
the bottom of the screen to abort/cancel the calibration.
Results of the last calibration indicating the reference
gas value, last calibration value and percent error.
Controller / User Interface | 4-9