Analog Board; Mcu Board - Ametek Dycor CG1100 Series User Manual

1.
2.
3.

Analog Board

Analog Board
Figure 7-7. CG1100 boards.
7-8 | Dycor CG1100 Oxygen Analyzer
Analog Board
Removing the analog board
The analog board has a total of eight cable/connectors attached to the

board. Please make note of the position of the cables before removing
and use the drawing in Figures 7-6 and 7-10 as a reference.
NOTE
Remove the 9-connector LED ribbon cable (J2) from the upper right-
hand corner of the analog board.
Remove the 2-position VSO valve connector (TB2) from the top
middle of the board.
Remove the 3-position Power connector (TB3) from the upper left-
hand top of the board.
TB3 TB3
TB6 TB6
TB4 TB4
TB5 TB5
J4 J4
J1 J1
PCB Bracket PCB Bracket

MCU Board

MCU Board
TB2 TB2
J2 J2
LED Board LED Board