Figure 4-2. Serial port configuration under PC Communication setup button.
PC communications
Setup
Port
Baud Rate
RS-232 Port
RS-485 Port
Address
4-4 | Dycor CG1100 Oxygen Analyzer
click the Setup button to set-up Pc communications.
select the coM port on the computer used to connect to you
device.
select the baud rate at which data will be transferred. (Either
9600 or 19200)
click if device is using the Rs-232 communications port.
click if device is using the Rs-485 communications port.
Type the network address of the device.