Download Print this page

Unpacking The Device; Installing The Device In Hazardous Locations - Siemens SIMATIC NET RUGGEDCOM RSG909R Installation Manual

Rugged ethernet switches
Hide thumbs

Advertisement

Installing the Device
2.2 Unpacking the Device
equipment ratings. Make sure to review all operating and installation instructions
before commissioning or performing maintenance on the device.
1.
2.
3.
4.
5.
6.
7.
2.2

Unpacking the Device

When unpacking the device, do the following:
1.
2.
3.
IMPORTANT
If any item is missing or damaged, contact Siemens for assistance.
2.3

Installing the Device in Hazardous Locations

The RUGGEDCOM RSG909R is designed to comply with the safety standards for Class
I, Division 2, Zone 2 hazardous locations where concentrations of flammable gases,
vapors or liquids may be present, as opposed to normal operating environments.
6
Review the relevant certification information for any regulatory
requirements.
For more information, refer to
Unpack and inspect the device.
For more information, refer to
Mount the device.
For more information, refer to
Connect the failsafe alarm relay.
For more information, refer to
12)".
Connect power and ground the device.
For more information, refer to
Connect the device to the network.
For more information, refer to
19)".
Configure the device.
For more information, refer to
Inspect the package for damage before opening it.
Visually inspect each item in the package for any physical damage.
Verify all items are included.
"Approvals (Page
37)".
"Unpacking the Device (Page
"Mounting the Device (Page
"Connecting the Failsafe Alarm Relay (Page
"Connecting Power (Page
"Connecting the Device to the Network (Page
"Configuring the Device (Page
Installation Manual, 02/2021, C79000-G8976-1388-12
6)".
8)".
14)".
26)".
RUGGEDCOM RSG909R

Advertisement

loading

  Also See for Siemens SIMATIC NET RUGGEDCOM RSG909R