Table of Contents
Advertisement
ACB60E/ACV60E CITY SERIES
6. Place Log 1 on top of the log guide. The pin under Log 1 and the log
guide will act as a guide for Log 1's proper positioning.
7. Install Log 2 to the left of Log 1. Make sure they are connected.
2
8. Install Log 3 to the right of Log 1. Rest the left side on the log guide.
Connect Log 1 and Log 3 to make the split between less visible.
9. Insert the pin of Log 4 into the hole. The left end of Log 4 should sit
31 mm from the edge of the panel, as shown below.
4
920-313
1
3
31 mm
2
10. Insert the pin of Log 5 into the hole on the left side of the pilot. Position
the left end of Log 5 54 mm from the edge of the panel.
11. Insert the pin of Log 6 into the hole on the right side of the pilot.
Position the right end of Log 6 51 mm from the edge of the panel.
12. Insert the pin of Log 7 into the hole on the right-most side. Position
the left end of the log 29 mm from edge of panel, as shown below.
29 mm
13. Install one box (1.6 kg) of 19 mm black coal (optional) around the
logs installed on the panels, as shown below.
Do not completely cover secondary air inlets-leave them 50% open.
Correct Black Coal placement
installation
5
54 mm
6
51 mm
7
City Series ACB60E | 81
12.23.20
Advertisement
Table of Contents
