Table of Contents
Advertisement
ACB40E/ACC40LE/ACC40RE/ACV40AC/ACB60E/ACV60E
OPTIONAL FAN KIT INSTALLATION
NOTE: Installation of Fan Kit should be done prior to
installation of the wall.
2) Mount and secure the fan housing assembly to
framing members, the front of the fan housing will
protrude 12.7mm out of the wall so it may be finished
with drywall, etc. See diagram 2
3. Install the air duct run. Secure the duct to the duct
collar on the unit and the fan housing with 3 screws
per end and aluminum duct tape.
Round Air Duct: Attach the 152.4mm round air duct
Diagram 1:
Front View
Finished
Surface
(12mm)
(12mm)
Front
of Fan
Brackets for
Housing
Diagram 2: Side View - Secure fan housing
to minimum 45mm framing.
(supplied) to the fireplace collar and run the duct to
the fan housing. Attach the round-to-oval adapter
to the fan housing and the air duct to the adapter
4. Install the On/Off switch in a convenient location.
This switch controls the fan operation.
NOTE: Variable speed or Rotary 3 speed switch
can be fitted.
5. Wire up the the fan, wall switch and power supply
per local codes. See wiring diagram as reference.
*Electrician to supply wiring.
6. Screw fan junction box to the fan housing.
920-347
Air Duct
45mm
7. Screw the Register Adapter Frame and the Air
Register to the Fan Housing. See diagram 4.
45mm
Diagram 4
ACB40E/ACC40LE/ACC40RE/ACV40AC only
Proceed with steps 8-9.
8. HeatWave Adapter Installation Kit (part #656-
Adjustable
995) includes a base adapter, oval to round
collar, and hardware. Attach oval to round
collar, then to base adapter with 4 screws as
different
shown below.
wall/floor
thickness.
Fan Housing
Round to Oval
Adapter
Secure with 3 Screws and
Aluminum Duct Tape at Unit
Oval to round
collar
Ensure curved part
of adapter is facing
the front of the unit as
shown
Base adapter
2
installation
9. Attach oval to round collar/base adapter as-
sembly (assembled in step 8) to unit in location
shown below with 4 screws.
NOTE: Install the HeatWave adapter on the left
of right side.
Base adapter
ACB60E/ACV60E only
10. Heatwave adapter installation kit (part # 946-
766) includes a base adapter and hardware.
11. Align adapter 946-766 so the hole pattern
on it and the top of the fireplace line up.
Air intake/open end should be facing
forward.
THEN
12. Screw adapter 946-766 to top of fireplace
using 4 self-tapping screws included.
13. Bend pipe attachment tabs up with a pair
of pliers.
City Series ACB60E | 73
Oval to round
collar
11.05.20
Advertisement
Table of Contents
