Table of Contents
Advertisement
CITY SERIES
installation
5. Secure the unit with framing to the wall studs with 64 mm - 76 mm wood
screws (not supplied). Use 8 screws and secure to 4 studs minimum.
Ensure the frame is also secured to the 2 additional studs spaced 1772
mm apart center to center, using the last hole on the upper and lower
Part B as shown below.
tooltip
Note: only 2 additional studs shown (regular framing not shown)
6. Attach the 2 center supports (Part I ) to upper and lower Part B of the back
frame with 2 screws each, each as shown. Before installing Part I, turn it
so that the side screw holes are on the lower end, next to lower Part B.
tooltip
Part I
7. Attach the 4 x end pieces (Part J) to the upper and lower Part B of
tooltip
the back frame with two screws each.
J
J
Part J
| City Series ACB60E
40
920-321
1772 mm
69-3/4"
Secure framing to wall
side screw
holes
I
I
J
J
8. Attach 2 x Part G to the previously installed Part J parts with 2 screws
at each end.
tooltip
Part G
9. Attach end cross braces (Parts E + F ) with 2 screws at each end
as shown below.
tooltip
F
Part E + F
tooltip
10. Install Part A (x2) to Part G on each side with 2 screws on each end.
Part A
2
G
G
A
A
E
12.23.20
Advertisement
Table of Contents
