Table of Contents
Advertisement
installer's information
Access Panel Removal
Access panel removal
The front access panels (x3) and one (x1) on the right side
The front access panels (x3) may be removed for ease of
(facing unit front) may be removed for ease of hooking up gas
hooking up gas and electrical--prior to finishing. Once complete
ensure that the access panel is reinstalled prior to any finishing.
and electrical--prior to finishing. Once complete ensure that the
See locations in diagram to the right.
access panel is reinstalled prior to any finishing.
See locations in diagram to the right.
Note: Once the finished material is installed, these access
panels are no longer accessible.
Note: Once the finished material is installed, these access
panels are no longer accessible.
1. Identify access panel to be removed, remove corresponding
outer trim panel by lifting up and o (centre panel shown
below).
1. Identify access panel to be removed, remove corresponding
outer trim panel by lifting up and off (centre panel shown
below).
2. From inside the unit--push in tab to release the access
panel at the top.
3. Push the access towards the inside of the unit, lift up from
the bottom to release bottom tabs, when clear, lift out of unit.
4. Reverse steps to reinstall access panel.
2. From inside the unit—push in tab to release the access
panel at the top.
3. Push the access towards the inside of the unit, lift up from
the bottom to release bottom tabs, when clear, lift out of unit.
4. Reverse steps to reinstall access panel.
| City Series ACB60E
28
Gas connection
tooltip
tooltip
tooltip
Electrical
Advertisement
Table of Contents
