On Vehicle Calibration; Fig 7 Shifting Reflections In A Stationary Situation - Baumer R600V.DAE0-11209335 Operating Manual

Off-highway ground & crop radar sensor

Hide thumbs Also See for R600V.DAE0-11209335:

Table of Contents

Manual R600V.DAE0 (EN)

Strong re-

flections

Fig 7

Shifting reflections in a stationary situation

2.2.3

On Vehicle Calibration

In a stationary situation (vehicle is not moving) while measuring on structured surfaces (such

as soil) the output distances may shift over time, due to slight changes in position due to

vibration and varying radar wave interference. For on-machine calibration purposes a flat sur-

face of adequate size (e.g. larger than 1200mm by 1200mm) with good radar reflection, and

with its geometric centre lined up with the sensor centre axis must be used to avoid this effect

and ensure a stable calibration procedure.

NOTE

For distance calibration on a vehicle a defined target must be used.

Page 14 of 29

Directionality

(opening angle)

Distance averaging

(over opening angle)

R600V.DAE0_manual_1.5 (EN).docm

Last Update: 07 Jan 2021

Table of Contents

Table of Contents

R600v.dae0-11228779 R600v.dae0-11188367 11209335 11228779 11188367