Audience; Application Policy - Baumer R600V.DAE0-11209335 Operating Manual

vehicle (e.g. a tractor) or an implement (e.g. combine header, sprayer boom) shall be deter-
mined. For flat and unstructured surfaces (e.g. asphalt, concrete) the usage of the "Off-High-
way Distance Radar Sensor" (R600V.DAH5-11205779) is recommended. The 122GHz band
NOTE
For flat and unstructured surfaces (e.g. asphalt, concrete) the usage of the
"Off-Highway Distance Radar Sensor" (R600V.DAH5-11205779) is recom-
mended.
can be used in many different applications. The original equipment manufacturer or system
integrator must observe local restrictions regarding the usage and/or placing in the market of
this product.
The sensor may be integrated into vehicles with 12VDC and 24VDC vehicle power supplies,
and provides a CAN SAE J1939 interface with a set speed of 250kbit/sec (may be customized
to allow 500kbit/sec for customer specific sensors). The output rate defaults to 50ms, but may
be varied between 10ms and 1000ms. High visibility LEDs display the sensor status, even in
bright ambient light.
1.3.2

Audience

This manual is intended for original equipment manufacturers (OEMs), or system integrators;
but not the end-users of equipment. It is the responsibility of the OEM / system integrator to
provide a user manual where relevant information from this manual is passed on, if it either
directly affects the safety or indirectly as discovered during a safety assessment of the con-
sequences of this product's integration. The Baumer "Off-highway Ground & Crop Radar sen-
sors" are not intended for safety applications and potentially explosive atmospheres. The OEM
or system integrator must ensure the safety of the equipment on which this product is used.
The manual is written based on current information. Baumer reserves the right to update prod-
ucts, documentation and its manuals if better information becomes available.
CAUTION
This product must not be used in safety applications and in poten-
tially explosive atmospheres.
1.3.3

Application Policy

Baumer products are applicable to a wide range of applications and / or end-use cases.
Baumer cannot know all possible conditions under which products are installed, used, and
operated. Every application and / or use-case is unique. The suitability and functionality of a
Baumer product and its performance under different applications and / or end-use cases can
only be verified by testing, and shall ultimately be the responsibility of the Baumer customer
using a Baumer product. When the product configuration (software version, electronics revi-
sions, mechanical revisions, etc.) is changed the customer needs to validate and verify the
Baumer product to ensure the proper function in the application and / or end-use case.
R600V.DAE0_manual_1.5 (EN).docm
Last Update: 07 Jan 2021
Manual R600V.DAE0 (EN)
Page 5 of 29